Spiegelende Perspex plaat 3mm x 400mm x 300mm

Spiegelende Perspex plaat 3mm x 400mm x 300mm
Artikelnr.55491
MerkKitronik
Model43152
Voorraad
Nog ... stuks op voorraad
Vandaag voor 23:59 besteld, morgen in huis.
Verzonden vanaf  € 25 - United States
Verkocht per stuk
€ 8,95
In winkelwagen
  • Koop 10 stuks voor € 8,80 per stuk2% korting
  • Koop 25 stuks voor € 8,65 per stuk3% korting
  • Koop 50 stuks voor € 8,50 per stuk5% korting
  • Koop 100 stuks voor € 8,30 per stuk7% korting
  • Koop 500 stuks voor € 8,15 per stuk9% korting

Beschrijving

This extruded 3mm Silver Mirrored Perspex Acrylic Sheet measures 400mm x 300mm. Mirror Perspex sheets are extruded clear sheets with a high quality mirror coating applied to one face.

They make an excellent alternative to glass mirrors. Shatter proof, marr-resistant and 17x stronger than glass, they can be used indoors for decoration or outdoors in the garden.

As acrylic mirrors are more flexible than glass they must be fixed to a flat wall/surface. If you are fitting it to a wall which is not flat, it is best to fit it first to something rigid such as a piece of MDF.

Features
    Mirror finish.
    Shatter proof.
    Very low light transmission.
    Easily laser cut, drilled and thermoformed.

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed. Note when laser cutting place the rear side of the Perspex to the top, so the laser is not bouncing off the reflective surface.

Perspex is a thermoplastic which means that when it is heated above 140-180C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

If you want to get a perfectly smooth finish on the edge of piece of machined Perspex a polishing technique can be used. Typical polishing techniques include diamond polishing and flame polishing.

It also possible to etch the surface of a Perspex sheet using a laser cutter. This can produce some very pleasing visual effects. The Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut (unlike PVC).

Perspex colour reference code
    Silver.

Dimensions
    Length: 400mm.
    Width: 300mm.
    Thickness: 3mm (nominal).

Tolerances
The manufacturing tolerance for the thickness of extruded Perspex acrylic sheets are the stated thickness +/-5%. This means a 3mm Perspex sheet could be between 2.85mm and 3.15mm in thickness.

Vraag en antwoord

Bijlagen

Beoordelingen

Er zijn nog geen beoordelingen achtergelaten voor dit product .



Logo Spiegelende Perspex plaat 3mm x 400mm x 300mm
Spiegelende Perspex plaat 3mm x 400mm x 300mmKlik op een ster om een beoordeling te geven