Doorzichtige Perspex plaat (groene tint) 3mm x 400mm x 300mm

Doorzichtige Perspex plaat (groene tint) 3mm x 400mm x 300mm
Levertijd 3 tot 10 werkdagen
Vandaag besteld, ongeveer dinsdag 1 oktober in huis.
Verzonden vanaf  € 25 - United States
Verkocht per stuk
€ 5,95
In winkelwagen
  • Koop 10 stuks voor € 5,75 per stuk3% korting
  • Koop 25 stuks voor € 5,55 per stuk7% korting
  • Koop 50 stuks voor € 5,35 per stuk10% korting
  • Koop 100 stuks voor € 5,15 per stuk13% korting
  • Koop 500 stuks voor € 4,95 per stuk17% korting


Glass Look Clear Perspex Acrylic Sheet, size 3mm x 400mm x 300mm (nominal) with excellent light transmission properties. These sheets have an appearance of green tint glass but at half the weight and five times its impact strength, offers the aesthetics but without the associated risk of breakages.

    Glass look - looks like green tinted glass.
    Lightweight alternative to glass.
    Easily laser cut, drilled and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

If you want to get a perfectly smooth finish on the edge of piece of machined Perspex a polishing technique can be used. Typical polishing techniques include diamond polishing and flame polishing.

It also possible to etch the surface of a Perspex sheet using a laser cutter. This can produce some very pleasing visual effects. The Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut (unlike PVC).

    Length: 400mm.
    Width: 300mm.
    Thickness: 3mm.

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm Perspex sheet could be between 2.3mm and 3.7mm in thickness.

Vraag en antwoord



Er zijn nog geen beoordelingen achtergelaten voor dit product .

Logo Doorzichtige Perspex plaat (groene tint) 3mm x 400mm x 300mm
Doorzichtige Perspex plaat (groene tint) 3mm x 400mm x 300mmKlik op een ster om een beoordeling te geven