Live chat

Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase

Merk Pololu Model 2256 Schrijf een review Share
Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase
  • Stepper motor: bipolar, 200 steps/rev, 20×42mm, 4.3V, 800mA (SY20STH42-0804A)
  • SY20STH42-0804A dimension diagram.
  • Bipolar stepper motor wires are terminated with bare leads.
  • The inside of a bipolar stepper motor (SOYO NEMA 14-size).
  • Pololu's assortment of stepper motors.
  • "SY20STH30-0604A":prod0J1204 (left) and "SY20STH42-0804A":prod0J2256 (right).
  • "SY20STH30-0604A":prod0J1204 (top) and "SY20STH42-0804A":prod0J2256 (bottom).
Pololu
Verkocht per stuk
€ 35,40€ 29,25 Excl. BTW
In winkelwagen
Staffelkortingen weergeven
Niet op voorraad Levertijd 5 tot 30 werkdagen Op voorraad bij leverancier Expected shipping date: donderdag 3 maart.
Shipped from  € 6,95 - België

Beschrijving

This small NEMA 8-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 800 mA at 4.3 V, allowing for a holding torque of 300 g-cm (4.2 oz-in). With a weight of 80 g, this is one of the smaller stepper motors we carry.

This small hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 800 mA at 4.3 V, allowing for a holding torque of 300 g-cm (4.2 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. These leads connect to the stepper motor through a removable JST-ZHR-5 connector. The motor can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver or one of our Tic Stepper Motor Controllers. In particular, the Tics make control easy because they support six different interfaces (USB, TTL serial, I²C, RC, analog voltages, and quadrature encoder) and are configurable over USB with our free configuration utility.

Our 4 mm universal mounting hub can be used to mount objects on the stepper motor’s 4 mm-diameter output shaft. For a slightly less powerful motor in the same NEMA size but a shorter length, consider Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase. A comparison between these two motors can be seen in the image below.

Specifications
  • Size: 20 mm square × 42 mm, not including the shaft (NEMA 8)
  • Weight: 80 g (2.8 oz)
  • Shaft diameter: 4 mm “D”
  • Steps per revolution: 200
  • Current rating: 800 mA per coil
  • Voltage rating: 4.3 V
  • Resistance: 5.4 Ω per coil
  • Holding torque: 300 g-cm (4.2 oz-in)
  • Inductance: 1.5 mH per coil
  • Lead length: 30 cm (12″)
  • Output shaft supported by two ball bearings
More specifications are available in the datasheet (28k pdf).

Dimensions
The following diagram shows the stepper motor dimensions in mm. The dimension labeled “Length” is 30 mm. The output D-shaft has a length of 15 mm and a 4 mm diameter with a section that is flattened by 0.5 mm. This shaft works with our 4 mm universal mounting hub.

Stepper Motor Applications
Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:
  • Printers
  • CNC machines
  • 3D printer/prototyping machines
  • Laser cutters
  • Pick and place machines
  • Linear actuators
  • Hard drives
Note: This stepper motor is SOYO part number SY20STH42-0804A.

Vragen en antwoorden

Beoordelingen

Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase Klik op een ster om een beoordeling te geven

Laatst bekeken

Webwinkelkeur Kiyoh Tweakers Trustpilot